8 Redial/Pause
This is used to redial the last number dialed before under
Standby mode or to insert a pause symbol in the fax number
under Edit mode.
9
Bill Copy Button
Press this button to enter into Bill Copy mode.
10 Wi-Fi button
11
Contacts
This is used to enter quickly the Phone Book option under Fax
mode.
12
Cancel
Execute cancel operation
Idle state interface under copy mode, to reset the "Number of
Copies" to 01.
13
Start Button
This is used to start relevant operations after finishing operation
settings.
In case of a feed failure, please press this key for pick-up and
printing again.
14 Menu Open the main menu of control panel
15 Back
Return to the previous menu.
16 OK Confirm the selection on screen.
17
UP
Scroll through the menus and options .
Increase 1 copy on the ready interface of Copy mode.
18
Down
Scroll through the menus and options .
Decrease 1 copy on the ready interface of Copy mode.
19 Status Light
Indicate the status of printer. (Please see Chapter 1.6).
Short press Wi-Fi button to turn on direct Wi-Fi connection of the
printer and automatically print out "Mobile Device Wi-Fi Connection
Wizard" page (for models with Wi-Fi function only).
Long press Wi-Fi button for over 2s to start WPS when Wi-Fi is not
connected or to disconnect Wi-Fi when it has already been connected
(for models with Wi-Fi function only).
Open save toner function(applicable to non-Wi-Fi model only).
To Next Page
Loading...
Need help?
General