Pantum M7100DN Series User Manual

12.1.4.Sleep Time Setting
1) Press "Menu" to enter the menu setting interface.
2) Press "▲" or "▼" to select "System Setting" and then press "OK".
3) Press direction key “▲” or “▼” to select “Sleep time set” option, and press “OK” key
to set the corresponding sleep time.
Note: • In sleep mode, the printer can be woken up by pressing any key or sending
printing work.
• Sleep time of network printer can be set with the embedded Web server
(Please refer to Chapter 6.2.3.4).
12.1.5.Mute printing
Sleep mode can reduce the energy consumption of printer effectively, and “Sleep time
setting” can be made in the idle time before the device enters sleep mode.
Set mute mode to realize low speed printing with low noise. When mute mode is “on”,
printing will be in a low speed. This mode is “off” by default.
1) Press "Menu" to enter the menu setting interface.
2) Press "▲" or "▼" to select "System Setting" and then press "OK".
3) Press direction key “▲” or “▼” and select “Mute printing” option and press “OK” key to turn
on/off this mode.
114

Pantum M7100DN Series Specifications

General

Brand	Pantum
Model	M7100DN Series
Category	All in One Printer
Language	English