22. What is the power requirement will be need?
Please check it with your power’s specification behind your printer.
23. How to change the printing port is available when it showed” Printing port is on
used”.
"Printer cannot be configured because printing port is on used." it may cause by PC port is
abnormal.
We suggest that you can check with below steps:
Step1: Change to another PC port then reconnects to the printer and re-install the driver.
Step2: Click PC table “start"-"Devices and Printers”, delete the useless printer copy manually (the
mouse right click on the useless printer name, and then delete it).
Then reconnect to the printer and re-install the driver.
Step3: Click PC table “start"-"printer and fax”, chose any of the printer copy, the mouse right click on
the “printer property"--"port”, then chose the customer no need the printer copy port of all
the printers, and click "delete port"-"confirm". At last reconnect to the printer and reinstall
the driver.
To Next Page
Loading...
Need help?
General