[TBL] Trouble display
ON = Trouble(s) occurring
(page 5)
[MEM] Alarm memory display
ON = Alarm(s) occurred
(page 13)
[BYP] Bypass programming
ON = Zone(s) bypassed
(page 13)
Zone Display:
The keys [1] to [0(10)] correspond
to zones 1 to 10 respectively:
Key lit = Open or entry delay
Key flash = In alarm
Off Key (red):
ON = Disarmed
OFF = System armed
Light (AC):
ON = Power on
OFF = Power off
StayD Light:
ON = StayD on
OFF = StayD off
(see StayD Mode on
page 9)
[ARM] (page 10)
[SLEEP] (page 10)
[STAY] (page 11)
ON = System armed
OFF = Zone disarmed
Flash = Exit Delay
Fast Flash = Exit Delay (final 10 sec.) / zone in alarm
= Press once + [MASTER CODE] for Quick Menu Programming.
(see Master Quick Menus on page 21)
IMPORTANT: If installed on a partitioned
system, the K636 will only display partition 1.
Keys
= Press once + [
MASTER CODE] for
Quick Menu programming
(see Master Quick Menus on page 21)
= Press & hold for keypad settings
= Press & hold for chime programming
(see Setting Chime Zones on page 5)
Icon Description Icon Description
StayD On = StayD mode enabled Flashing = System is in Master Quick Menu mode
Indicate Partition 1 and 2 EXIT DELAY Flashing = Enter code before Exit Delay ends
OFF On = System is disarmed ENTRY DELAY Flashing = Enter code before Entry Delay ends
STAY On = System is Stay armed ENTER CODE On = Enter your user code
SLEEP On = System is Sleep armed MEMORY On = Alarm(s) occurred
ARM On = Partition is armed BYPASS On = Zone(s) bypassed
ALARM Flashing = System is in alarm CHIME On = Displays chime zones when in Chime Prog.
mode
PRE-ALARM
DELAY
On = Countdown to alarm on Pre-Alarm zones TROUBLE Trouble flashes and number(s) corresponding to the
trouble(s) illuminate (see Trouble List on page 5)
ZONE OPEN On = Illuminated zone(s) are open
AC
On = AC power is supplied to the keypad
ZONE IN ALARM On = Illuminated zone(s) are in alarm
NO AC
On = Keypad is running on backup battery power
K32I Icon Display & Descriptions
To Next Page
Loading...
Need help?
General
