= Press once + [MASTER
CODE
] for Quick Menu
Programming
Off Light (red):
On = Disarmed
Off = System armed
Zone Display:
Keys [1] to [0(10)] correspond
to zones 1 to 10 respectively.
Key Lit: Open or entry delay
Key Flash: In alarm
Partition 1 Status
Partition 2 Status
On = StayD
Mode Enabled
Arm (red), Sleep (yel), Stay (grn):
On = Partition armed
Off = Partition disarmed
Flash = Exit Delay
Fast Flash* = Exit Delay (final 10
sec.)
Fast Flash* = Partition in alarm
* Audible Indicators:
Continuous beep = Alarm
Variable beep = Fire alarm
Intermittent beep = Beginning of
exit delay
Fast beep = Final 10 sec. of exit
delay
AC Light
On = Power on
Off = Power off
[TBL] Trouble display
On = Trouble(s) occurring
[
MEM] Alarm memory display
On = Alarm(s) occurred
[
BYP] Bypass programming
On = Zone(s) bypassed
To Regular Arm:
1. Close all zones in the desired
partition.
2. Press [
ARM].
3. Enter your [
ACCESS CODE]*.
To Stay Arm:
1. Press the [
STAY] key.
2. Enter your [
ACCESS CODE]*.
To Sleep Arm:
1. Press the [
SLEEP] key.
2. Enter your [
ACCESS CODE]*.
* If needed, press button(s) corresponding to desired partition(s). For two partitions, press the other key after
the confirmation beep.
ARMING AND DISARMING
To Next Page
Need help?
General
