Parkside 312018 User Manual

PSTK 800 B2
■ 2
│
GB
│
IE
│
NI
JIGSAW PSTK 800 B2
Introduction
Congratulations on the purchase of your
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain important
information on safety, use and disposal. Before
using the product, familiarise yourself with all
operating and safety instructions. Use this product
only as described and only for the specified areas
of application. Please also pass these operating
instructions on to any future owner(s).
Proper use
This appliance is suitable for straight and curved
cuts as well as mitre cuts of up to 45° on angular
workpieces made of plastic, wood and light metal.
This appliance is exclusively intended for private
use in dry rooms. Observe the information on saw
blade types. Any other usage of or modification
to the appliance is deemed to be improper usage
and carries the risk of serious personal injury.
The manufacturer accepts no responsibility for
damage(s) arising out of usage contrary to the
instructions specified below.
Features
Knob handle
ON/OFF switch
Stroke rate adjusting wheel
Clamping lever
Power cable
Reducer
Extraction connector
Baseplate
Sliding shoe
Switch for sawdust blower
Pendulum stroke switch
Toothing
Clamping screw
Guide fence
Guide roller
Saw blade
Insertion openings (each incl. clamping screw)
Guard
Pivoting guard
Quick-release chuck
Splinter guard
ON/OFF switch laser/working light
Laser discharge opening
Package contents
1 jigsaw incl. extraction connector
1 guide fence
1 reducer
1 operating manual
3 saw blades for woodwork
1 saw blade for metalwork
Technical details
Jigsaw: Parkside PSTK 800 B2
Rated voltage: 230 V ∼ 50 Hz
(Alternating Current)
Rated input: 800 W
No-load speed: n
0
: 0 - 3100 rpm
Cutting depth: wood/metal: 80/8 mm
Pendulum stroke: 3 stages and fine cut
adjustment
Diagonal cuts: 0°/ 22.5°/ 45° left/right
Protection class: II/
(double insulation)
Noise and vibration data:
Noise measurement determined in accordance
with EN 60745. The A-rated noise level of the
electric tool is typically:
Noise emission value:
Sound pressure level: L
pA
= 90 dB(A)
Uncertainty K: K
pA
= 3 dB
Sound power level: L
wA
= 101 dB(A)
Uncertainty K: K
wA
= 3 dB
Wear ear protection!
Vibration total values (trax vector sum) determined
according to EN 60745:
Vibration emission value:
Cutting boards a
h,B
= 10.2 m/s
2
Uncertainty K = 1.5 m/s
2
Cutting sheet metal: a
h,M
= 11.9 m/s
2
Uncertainty K = 1.5 m/s
2

Parkside 312018 Specifications

General

Brand	Parkside
Model	312018
Category	Power Tool
Language	English