PSTK 800 B2
GB
│
IE
│
NI
│
5 ■
■ After completing your work, switch the electric
tool off and do not pull the saw blade out
of the cut until the tool has come to a standstill.
This avoids kickbacks, and allows you to put
the tool down safely.
■ Only use undamaged saw blades that are in
perfect working order. Bent and blunt saw blades
can break or cause a kickback.
■ Do not try and slow the saw blade
down
after switching off by applying lateral pressure.
The saw blade can be damaged, break or
cause a kickback.
■ Immobilise the workpiece securely. Use clamps/
vices to hold the workpiece firmly. This is much
safer than simply holding it in your hand.
■ Always run the power cord away from the
appliance to the rear.
■ Never work on moistened materials or wet
surfaces.
■ Hazards caused by dust! When working for
extended periods on wood and, in particular,
materials that produce dusts that are hazardous
to health, connect the appliance to an appropri-
ate dust extraction appliance.
■ Wear a dust mask.
■ Ensure there is sufficient ventilation.
WARNING! Protect yourself from
laser radiation!
LASER
2
P max.: < 1 mW • λ: 650 nm • EN 60825-1:2014
■ Never look directly into the laser beam or into
the laser discharge opening
from which it
emerges.
WARNING!
► Looking at a laser beam through optical
instruments (e.g. magnifying glasses etc.)
can cause eye injuries.
► Caution! If operating and adjustment equip-
ment is used or procedures other than those
specified here are carried out, this may result
in hazardous radiation exposure.
■ Never aim the laser beam at reflective surfaces,
people or animals. Even brief visual contact
with a laser beam can result in eye injuries.
Original accessories/additional
equipment
■ Only use the accessories and additional
equipment that are specified in the operat-
ing instructions and are compatible with
the appliance.
Information on saw blades
The Parkside basic equipment includes saw blades
for use with wood and metal.
▯ 3 saw blades for general wood cuts
▯ 1 saw blade for light metals up to 3 mm
NOTE
► You can also use any other saw blades pro-
vided they are fitted with a suitable mounting
(single-lug shank).
Saw blade type
suitable unsuitable
To Next Page
Loading...
Need help?
General
