19
IEGB
Content
Introduction ...............................19
Intended purpose .......................19
General description ....................19
Extent of the delivery ......................20
Functional description ..................... 20
Overview ......................................20
Technical data ............................ 20
Safety instructions ......................21
Symbols and icons .........................21
Correct handling of the
battery charger .............................. 26
Charging the battery ..................27
Recharging the battery ....................27
Checking the battery charge level ....28
Starting up ................................ 28
Operation ..................................28
Switching on/off ............................ 28
Direction switch .............................28
Bit selection from the bit
changeable drum ...........................28
Bit change in the bit
changeable drum ...........................28
Use extension bit holder ..................29
Cleaning and maintenance ......... 29
Cleaning .......................................29
Maintenance .................................29
Storage ......................................29
Spare parts/Accessories ............. 30
Disposal and protection of
the environment .........................30
Guarantee .................................31
Repair Service ............................32
Service-Center ............................32
Importer .................................... 32
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
a fi nal inspection. The functionality of your
equipment is therefore guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety,
use and disposal. Before using the
product, familiarise yourself with
all of the operating and safety in-
structions. Use the product only as
described and for the applications
specifi ed. Keep this manual safely
and in the event that the product
is passed on, hand over all docu-
ments to the third party.
Intended purpose
The device is intended for drilling screws
in and out in wood, metal or plastic. Any
other use that is not explicitly approved in
these instructions may result in damage to
the equipment and represent a serious dan-
ger to the user. The manufacturer cannot
be held liable for damage when the device
is not used in conformity with its intended
purpose or due to incorrect operation. This
equipment is not suitable for commercial use.
Commercial use will invalidate the guaran-
tee.
General description
The illustrations are on the
fold-out page.
Translation of the original EC
declaration of conformity ..........115
To Next Page
Loading...
Need help?
General
