PBK 4 A1
GB
│
IE
│
NI
│
3 ■
Strimmer/cutting blade attachment PBK 4 A1-2
2 x bolts (with snap ring, washer)
Blade guard
3-section cutting blade
Strimmer with cutting filament
Front boom (strimmer/3-section cutting blade)
Locking pin
Drive shaft
Extension attachment
Boom
Screw grip
Locking pin
Drive shaft
Accessories
Carrying strap
Protective cover for blade
Chain guard
Organic chain oil
Oil/petrol mixing canister
Safety goggles
Hex key 4 mm
Hex key 5 mm
Open-ended spanner SW 8/10
Spark plug wrench/flat-blade screwdriver
Tool bag
Nut M19 x 1.0 (left-hand thread)
Pressure plate cover
Pressure plate
Drive plate
Cutting filament
Funnel
Package contents
1 engine unit
1 hedge trimmer attachment PBK 4 A1-3 (hereinafter hedge trimmer)
1 pole pruner attachment PBK 4 A1-4 (hereinafter pole pruner)
1 strimmer/cutting blade attachment PBK 4 A1-2
1 extension attachment
1 handle with barrier bar
1 strimmer with cutting filament
1 cutting filament (filament Ø: 2.4 mm/filament length: 6 m)
1 3-section cutting blade
1 Carrying harness
1 chain guard
1 blade guard
1 oil/petrol mixing canister
1 100 ml organic chain oil
1 tool bag
1 4 mm hex key
1 5 mm hex key
1 spark plug wrench/flat-blade screwdriver
1 SW 8/10 open-ended spanner
1 pair of safety goggles PBKZ 1 A1
1 funnel
1 operating instructions
Technical data
Engine unit: PBK 4 A1-1
Engine type: 2-stroke engine, air-cooled, chrome cylinder
Engine output (max.): 1.35 kW/1.85 hp
Cylinder capacity: 42.7 cm³
Engine idle speed: 3000 min
-1
(rpm)
Max. engine speed
with 3-section cutting blade: 9200 min
-1
(rpm)
with strimmer: 8700 min
-1
(rpm)
with chainsaw: 9200 min
-1
(rpm)
with hedge trimmer: 9200 min
-1
(rpm)
Max. cutting speed
with 3-section cutting blade: 6900 min
-1
(rpm)m
with strimmer: 6525 min
-1
(rpm)
with chainsaw: 20 m/s
with hedge trimmer: 1550 strokes/min
(rpm)
Ignition: electronic
Drive: centrifugal clutch
Weight:
(empty tank): approx. 5.6 kg
Fuel tank capacity: 1200 cm
3
Spark plug: CDK L8RTC
Fuel consumption at
max. engine performance: 0.6 kg/h
Specific
fuel consumption
at max. engine performance: 431 g/kWh
Hedge trimmer: PBK 4 A1-3
Cut length: 425 mm
Tooth spacing: 24 mm
Weight
(ready for use): approx. 2.24 kg
Pole pruner attachment: PBK 4 A1-4
Weight (ready for use): approx. 1.6 kg
Oil tank, recommended fill level: 140 cm
3
Cut length: approx. 260 mm
Blade: Oregon type 100SDEA318
Saw chain: Oregon 91P040X
Strimmer/cutting blade
attachment: PBK 4 A1-2
Strimmer with cutting filament (IAN 331365):
Filament cutting circle Ø: 430 mm
Filament length: 6.0 m
Filament Ø: 2.4 mm
3-section cutting blade (IAN 331365):
Cutting blade cutting
diameter Ø: 255 mm
To Next Page
Loading...
Need help?
General
