EasyManuals Logo
Home>Parkside>Paint Sprayer>PFS 400 A1

Parkside PFS 400 A1 User Manual

Parkside PFS 400 A1
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
PFS 400 A1
GB
IE
NI
CY
 7
Switching on:
Insert the plug into a mains power socket.
To switch the appliance on, pull the trigger
and keep it pulled.
Switching off:
To stop spraying, simply release the trigger .
When you are finished working, disconnect the
plug from the mains power supply.
Selecting a spray profile
Setting the spray volume:
Turn the spray volume adjusting wheel to the
desired position:
(–) = minimum spray volume
(+) = maximum spray volume
NOTE
We recommend starting at the minimum
setting.
Selecting a jet type
Undo the union nut .
Turn the protruding parts of the nozzle head
so that they point to the desired symbol on the
spray unit .
The appliance has the following settings:
▯ round jet
vertical flat jet
horizontal flat jet
Re-tighten the union nut .
Maintenance and cleaning
WARNING!
Disconnect the mains plug during
breaks and while doing maintenance
work on the appliance.
CAUTION!
Never immerse the paint spray gun completely
in solvent.
NOTE
Thorough cleaning after every use is very
important for safety and operation. Oth-
erwise, the needle could get blocked and
proper operation of the appliance cannot be
guaranteed.
Wear suitable gloves when cleaning.
After every use, squirt water through the
appliance.
To clean the spray unit , nozzle head ,
nozzles and the spray holes inside, use the
supplied cleaning brush , cleaning needle
or a cloth. Never use petrol, solvents or cleans-
ers which can damage plastic.
For rust protection purposes, you can spray a
little sewing machine oil through the spray gun
after cleaning.
Oil all moving parts from time to time.
Do not use any silicon-based lubricants.
Store the appliance only in dry interior rooms.
Cleaning/replacing the air filter
Check the air filter regularly, otherwise malfunc-
tions may occur.
Remove the screws from the air filter cover .
Remove the air filter cover .
Remove the air filter and examine it for
contamination.
If necessary, shake out the air filter and
clean it under running water. Leave the air filter
to dry.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Parkside PFS 400 A1 and is the answer not in the manual?

Parkside PFS 400 A1 Specifications

General IconGeneral
BrandParkside
ModelPFS 400 A1
CategoryPaint Sprayer
LanguageEnglish

Related product manuals