24 GB
- Result of an addition and the individual values of the addition
are automatically stored in the memory.
Subtraction (Minus)
The subtraction of measurements is carried out in the same way as
the addition. The only difference is that the add / subtract button
7
has to be pressed again while the plus symbol is flashing on the
display to get minus symbol on the display. Rest are same.
Historical memory
All measured and calculated values will be automatically stored in
the memory. The values are saved with their unit (length, area or
volume). Calculated values are stored together with the respective
individual values. There are a total of 100 memory locations avail-
able. As soon as all 100 memory locations are occupied, the old-
est memory record will be over-written by newest record.
Calling up a stored memory
Briefly press the memory button
9
to display the latest stored
memory. Memory icon
27
will be displayed on the display and
the respective memory location number will be shown on the
“memory location number row“
19 b
to indicate that the prod-
uct has entered the historical memory mode.
Press the memory button
9
again to go to next memory.
To Next Page
Loading...
