10
GB
Blow Function
is recommended.
connecting blower (17) on the motor
head (3).
Cleaning/Maintenance
Pull out the mains plug.
Danger of electric shock.
Always check the appliance before
use for any obvious faults such as
a defective mains cable, and have
these repaired or replaced.
Cleaning the Equipment:
Never hose the appliance
down with water. Never use
aggressive cleaning agents or
solvents. This could damage
the appliance.
stainless steel con-
tainer
(
- Opening the drain plug to allow the
vacuumed liquid to drain out (
10). A liquid residue remains in the
container.
To remove all residual liquids, fold
down the bow handle (1) and
take off the motor head (
the bow handle with the locking
levers (16), hold the stainless steel
container (9) with one hand on the
bow handle and the other on the
bottom of the container and pour
out the residual liquid.
cloth.
23) with luke-
warm water and soap, and allow to
dry.
(
25) and clean it with a paint brush
or hand brush.
26)
when full (see “replacement parts” for
reordering)
Storage
1. Release both locking levers
(
16) and fold down
the bow handle (1).
2. Wind the power cable (5)
around the power cable holder
(4).
3. The attachment ports (15/18)
serve to store the telescopic
suction hose (19), suction hose
(21) and nozzles (27/28).
4. Store the appliance in a dry
place and out of reach of chil-
dren.
Disposal/Environmental
protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
them.
Machines must not be disposed of
with household refuse.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on
for recycling. Contact our Service Centre
for more details.
Defective units returned to us will be dis-
posed of for free.
To Next Page
Loading...
Need help?
General
