PPS 200 C2
■ 2
│
GB
│
IE
│
NI
│
CY
POWER SANDER PPS 200 C2
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is intended for the dry sanding of
wood, metal and paintwork. Any other uses of the
appliance are considered improper and carry the
risk of serious personal injury. The manufacturer
accepts no responsibility for damage(s) attribut-
able to misuse. This appliance is not intended for
commercial use.
Features
1 Grip
2 Release button
3 Dust collector
4 Nozzle (suction)
5 Adapter for external vacuum extraction
6 Sanding plate (rectangular)
7 Sanding sheet
8 Sanding plate (triangle bottom)
9 Sanding plate (triangle top)
0 ON/OFF switch
Package contents
1 Power sander
3 Sanding sheets (120 grain)
1 dust collector
1 adapter for external vacuum extraction
1 set of operating instructions
Technical data
Nominal voltage 230 V ∼, 50 Hz (AC)
Nominal power input 200 W
Nominal speed n
0
14000 rpm
Nominal oscillation speed n
0
28000 rpm
Sanding sheet dimensions rectangular
112 x 112 mm
Triangle
93 x 93 x 92 mm
Protection class II /
(double insulation)
Noise and vibration data
Noise measurement value determined in accordance
with EN 62841. The A-rated noise level of the
power tool is typically as follows:
Sound pressure level L
PA
= 78.5 dB (A)
Sound power level L
WA
= 89.5 dB (A)
Uncertainty K = 3 dB
Wear hearing protection!
Vibration values (vector total of three directions)
determined in accordance with EN 62841:
Vibration emission value a
h
= 5.71 m/s
2
Uncertainty K = 1.5 m/s
2
To Next Page
Loading...
Need help?
General