EN142 EN 143
Intended use
This garden tool is intended for trimming and
cutting lawn edges and small grassy areas
and lawns according to the descriptions and
safety instructions indicated in this operating
manual. It is not suitable for trimming bushes,
hedges and shrubs.
The tool is not intended for commercial use.
Any other use is not as intended. Improper use
is not covered by the warranty and the manu-
facturer will reject any liability. The user is li-
able for all injuries to third parties and damage
to their property. Operate the unit only in the
technical condition as stipulated and delivered
by the manufacturer. Arbitrary changes to the
unit will exclude the manufacturer from any li-
ability for resulting injury and/or damage.
Product overview
1 Handle bar
2 Auxiliary handle
3 Auxiliary handle locking knob
4 Handle rotation locking button
5 Height adjustment locking collar
6 Locking button for trimmer head
7 Trimmer head
8 Guide wheel
9 Spool
10 Safety guard
11 Battery (not included)
12 Battery release switch
13 On/ o switch
14 Release switch
ASSEMBLING THE TRIMMER
Position the safety guard 10 onto the
pins of the trimmer head 7. Place the
guide wheel 8 onto the safety guard.
1 Fix the safety guard 10 and guide wheel
8 with the screws and tighten them.
2
ADJUST THE ANGLE OF THE HANDLE
Press the handle rotation locking but-
ton 4 to rotate the handle to the desired
position. Release the locking button.
ADJUST THE TRIMMER HEAD ANGLE
Press the locking button for the trim-
mer head 6 and rotate the trimmer
head 7 to the required angle. Release
the locking button.
A Horizontal cutting
B Edge trimming
1 2
Adjustments
Caution! Before performing any work on the tool, remove the battery.
Lieferumfang
Etendue de livraison
Materiale compreso nella fornitura
Leveringsomvang
Leveransomfång
Rozsah dodávky
Rozsah dodávky
Volumul livrat
Scope of delivery
DE
SV
IT
SK
FR
CZ
NL
RO
GB
1x 1x
1x 1x
3
6
1
2
14
13
12
11
4
5
7
8
10
9
1 2
21
1.
2.
1.
2.
B
A
To Next Page
Loading...
Need help?
General
