TB 100
PAG. 11 Cod. 29050055 Rev.01 Edit: 09/2015
Symbols on the machine
These relate to operator safety, correct use and maintenance of the machine. Check that
all personnel understand and are familiar with the meanings before operating the machine.
1)
Read the Operating Manual
before starting up the
machine.
2)
Debris expulsion hazard.
Maintain a safe distance.
3)
Cutting hazard in contact with
moving parts. Wait until all
moving parts are stationary.
4)
Crushing hazard. Do not
enter the space between the
tractor and the machine.
5)
Note the PTO revs.
Contact hazard with
PTO at 540 rpm.
6)
Lubrication points
(Lubrication required
every 40 work hours.
7)
Lifting points.
8)
Wear personal
protection gear
AT ALL TIMES.
1-2
3
4
6
To Next Page
Loading...
General