TB 100
PAG. 6 Cod. 29050055 Rev.01 Edit: 09/2015
Technical characteristics of the version with the hydraulic engine.
TECHNICAL SPECIFICATION TB100 Hydraulic engine
Chipping Capacity 4 to 6 m
cuttings per hr depending on material
Guaranteed wood diameter 80 mm
Permitted wood diameter 100 mm
Chipping Blades 2 reversible and regrindable blades
Rotor cutting width 310 mm
Power Unit Hydraulic engine
(Tractor with a pump of 40 l/min min. capacity)
Support Linkage Attachable loader - optional
Length 2080 mm
Width 810 mm
Height 1290 mm
Feed Height 660 mm
Weight (Empty) 170 Kg
Noise
Noise levels vary, depending on the specific type of material being processed. Also the
duration of the operation itself may differ. Noise emission tests had been carried out and
the guaranteed sound power level is displayed on the CE plate as follows:
Lwa 120dB(A)
Attachable loader (optional)
Infeed chute
Control lever
Discharge chute
To Next Page
Loading...
General