Pfaff 1540 User Manual

To make
threading the needle easier and
quicker,
you
have been provided with the
PFAFF needle threader (13). Lower the
presser foot. Turn the handwheel until the
needle is at its highest position. Place
the needle thread under hook A and hold
it taut. Move the needle threader fully
downwards and turn it towards the needle
so that the small hook B goes through the
needle
eye.
Place the thread into the hook
from below.
Turn
the
needle threader towards the rear,
releasing
the
thread carefully, and allow
the threader
to
move upwards. You can
now pull the thread through the needle
Threading the twin
needle
Insert the twin needle.
Fit the second spool holder and place
one
spool
of thread on each
holder.
In the left threading slot
(11)
you will find
tension disk A. During threading, make
sure that
you pass
one thread left and
one thread right over tension disk A.
Carry on threading in the usual way, but
make sure the threads
are
not twisted
with each other.
Pull the threads right and left into thread
guide (25) and thread the needles.
Note: You cannot
use
the needle threader
for a twin needle (Model 1540).
Operate
your Pfaff
select
Needle
threader
(Model
1540)
A
B
eye.
)
—
L9

Pfaff 1540 Specifications

General

Brand	Pfaff
Model	1540
Category	Sewing Machine
Language	English