Home
Pfaff
Sewing Machine
3701 Series
Pfaff 3701 Series Adjustment Manual
4
of 1
of 1 rating
54 pages
Give review
Manual
Specs
To Next Page
To Next Page
To Previous Page
To Previous Page
Loading...
Adjustment
13 - 3
13
.05
Adjusting the basic machine
13
.05.01
Basic position of the machine drive
This adjustment is only required if toothed belt
2
has been removed.
Requirement
When the needle bar position is 0.6 mm above the BDC, the marks on the machine
housing
3
and toothed belt wheel
1
must be flush with each other.
●
Set needle bar at 0.6 mm past b.d.c.
●
Turn toothed belt sprocket
1
according to
Requirement
and push on toothed belt
2
.
Fig. 13 - 02
57-42a
3
4
1
2
6
8
Table of Contents
Table of Contents
3
Contents
4
Tools, Gauges and Other Accessories for Adjusting
5
Abbreviations
5
Explanation of the Symbols
5
Checking and Adjusting Aids
6
Adjusting the Basic Machine
7
Basic Position of the Machine Drive
7
Preadjusting the Needle Height
8
Bottom Feed Neutral Position
9
Neutral Position of the Needle Feed (Only on PFAFF 1181)
10
Bottom Feed Lifting Motion
11
Bottom Feed Dog Height
12
Feed Dog Motion of Bottom Feed Dog
13
Feeding Motion of Needle Feed (Only on PFAFF 1181)
14
Needle in Needle Hole Center (Only on PFAFF 1183)
15
Needle to Needle Hole Centre (on PFAFF 1181)
16
Synchronous Strokes of Needle- and Drop Feed (Only on PFAFF 1181)
17
Hook Shaft Bearing and Toothed Belt Tension
18
Hook Lubrication
19
Needle Rise, Hook-To-Needle Clearance, Needle Height and Bobbin Case Position Finger
20
Thread Check Spring and Slack Thread Regulator
21
Position of Knee Lever
22
Knee Lever Stop
23
Bobbin Winder
24
Limiting the Stitch Length
25
Stitch Length Adaptation
26
Presser Foot Pressure
27
Modifying the Needle Bar Stroke
28
Adjusting the Edge Trimmer -731/01
29
Zero Position of the Knife
29
Cutting Motion
30
Knife Height
31
Knife Position in Sewing Direction
32
Knife Position Crosswise to Sewing Direction
33
Adjusting the Thread Trimming Device -900/24
34
Adjusting the Solenoid / Preliminary Adjustment of the Control Cam
34
Lateral Alignment of the Thread Catcher
35
Knife Position
36
Front Point of Reversal of the Thread Catcher
37
Manual Trimming Check
38
Needle Thread Tension Release
39
Readjusting the Control Cam
40
Adjusting the Thread Wiper -909/04
41
Thread Wiper Movement
41
Thread Wiper Position
42
Adjusting the Automatic Presser Foot Lift -910/06
43
Adjusting the Back-Tacking Mechanism -911/37
44
Parameter Settings
45
Selecting the User Level
45
Example of a Parameter Input
46
Liste der Parameter
47
Reset / Cold Start
48
Internet Update of the Machine Software
49
Explanation of the Error Signals
50
Circuit Diagrams
51
Other manuals for Pfaff 3701 Series
Instruction Manual
74 pages
Manual
6 pages
Supplement To The Instruction Manual
32 pages
4
Based on 1 rating
Ask a question
Give review
Questions and Answers:
Need help?
Do you have a question about the Pfaff 3701 Series and is the answer not in the manual?
Ask a question
Pfaff 3701 Series Specifications
General
Brand
Pfaff
Model
3701 Series
Category
Sewing Machine
Language
English
Related product manuals
Pfaff 3704-2/03
122 pages
Pfaff 345
13 pages
Pfaff 3834-3/11
48 pages
Pfaff 3511-2/01
106 pages
Pfaff 3822-1/32
130 pages
Pfaff 3511-3/01
70 pages
Pfaff Hobby 340
42 pages
Pfaff 3519-5/01
158 pages
Pfaff SMART 300E
48 pages
Pfaff Select 3.0
6 pages
Pfaff creative 3.0
112 pages
Pfaff Passport 3.0
32 pages
To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?
General
