Pfaff hobbylock 799 User Manual

9
Threading
the right
looper
Thread
the right looper
in sequence
1
to
B and pull about
four
inches
of
thread
through the
looper
eye. The
thread
path is marked
in
green in the
threading
diagram
on the rear
side of
the
waste box.
Important:
In order
to achieve
perfect sewing
results,
the thread must
be pulled
between
the tension
discs during
threading.
Note:
Changing a
spool with the
machine
threaded
Cut the
threads off
close to the
thread
spool.
Place new thread
spools on
spool holders
22.
Tie
the ends
of the
old thread
and
new thread
together.
Pull
the
needle threads
out of the
needles.
Now pull the
threads
through until
the knots are
about six
inches
past the
last thread
guide
before
the
needles. Cut
the knots off
and thread
up
the respective
needles.
The
looper threads
can be
pulled
through
beyond
the
looper
eyes. Pull
about four inches
of thread
through
the
looper
eye.
I

Pfaff hobbylock 799 Specifications

General

Brand	Pfaff
Model	hobbylock 799
Category	Sewing Machine
Language	English