Pfaff select 1520 User Manual

16
Operate your Pfaff select
Stitch width dial
The stitch width can be adjusted with this dial
(27). When selecting the width, the needle
must not be in the material.
Basic setting: Turn the stitch width knob (27) to
the symbol
(maximum stitch width).
Exception: Straight stitch is sewn with stitch
width 0.
In chapter “Utility stitches and practical sewing”
(pages 21-44), you will fi nd recommendations
in the tables for the stitch width selection of
individual stitches. During sewing you can also
change the stitch width.
Needle position dial
In the center needle position
, 14
additional needle positions can be selected
by turning the needle positioning dial (28) in
increments to the left or right. The furthest
needle position to the left
can be
achieved by turning the dial(28) as far as it will
go to the right. The furthest needle position
to the right can be achieved by turning
the dial as far as it will go the left. When the
position of the needle is being changed, the
needle must not be in the material.
Note: If you have selected the right needle
position, you can now use the width dial (27) to
increase or reduce the width of the left side of
the stitch. The reverse applies also for needle
position to the left (see page 49).

Pfaff select 1520 Specifications

General

Brand	Pfaff
Model	select 1520
Category	Sewing Machine
Language	English