69
Maintenance and trouble-shooting
Changing the sewing lamp
Switch off the main switch
• Disconnect the mains plug and the foot
control plug from the machine.
• Take off the removable accessory tray
(15).
The sewing lamp is located inside the left
side of the sewing machine
Removal:
• Hold the sewing machine tightly.
• Push the lamp into its socket as far as
it will go.
• At the same time, turn the lamp a half
turn anti-clockwise and remove it.
Insertion:
• Insert the lamp in the diagonal socket
and turn it so that both stops of the
lamp engage.
• Now push the lamp fully into the socket
and turn it clockwise so that it is held
fi rmly.
Note: The lamp changer (available as a
special accessory) will make changing the
lamp much easier.
Important!
The maximum permissible wattage of
the lamp with a plug-in socket is 15
watts!
To Next Page
Loading...
Need help?
General
