To Next Page

To Previous Page





5





Connectionsandsetup

RefertoyourTV’sQuickStartGuideorotherprovideddocumentationtoformodel‐specificinformation

aboutattachingthebaseorawallmountandmakingconnectionstoACpowerandtoyourother

audio/videodevices.ThefollowinginformationappliestoallRokuTVmodels.

Connecting an antenna, cable, or satellite box

Ifyouareusinganantenna,CATVcablewithoutaset‐topbox,oracableorsatelliteboxthathasonlyan

antennaoutput,connecta75‐ohmcoaxialcable(notprovided)fromthedevicetotheANT/CABLEinput

ontheTV.

Tip:Ifyouareusinganantennawith

a300ohmtwin‐leadcable,youneedtousea300‐to‐75ohm

adapter(notprovided)toadaptthetwin‐leadcabletoaconnectionthatiscompatiblewiththeTV’s

antennainput.

Tip:IfyoureceiveyourTVstationsthroughasettopboxfromacable

orsatelliteTVprovider,connectit

totheTVusingthebestconnectionmethodavailable.Frommosttoleastdesirable:

 HDMI

input–DigitalHDandSDvideo

 AVinput–analogSD video

 Antennainput–analogSDvideousingNTSC

Philips 29PFL4508/F4 User Manual

Other manuals for Philips 29PFL4508/F4