Channel Logos
In some countries, the TV can show the channel
logos.
If you do not want these logos to appear, you can
switch them off.
To switch off the logos…
1 - Press
, select All Settings and press OK.
2 - Select General Settings and press
(right) to
enter the menu.
3 - Select Advanced > Channel Logos and
press
(right) to enter the menu.
4 - Select Off and press OK.
5 - Press
(left) repeatedly if necessary, to close
the menu.
HbbTV
If a TV channel offers HbbTV pages, you must first
switch on HbbTV in the TV settings to view the pages.
1 - Press
, select All Settings and press OK.
2 - Select General Settings and press
(right) to
enter the menu.
3 - Select Advanced > HbbTV, and press OK.
4 - Select On or Off.
5 - Press
(left) repeatedly if necessary, to close
the menu.
If you want to avoid access to HbbTV pages on a
specific channel, you can block the HbbTV pages for
this channel only.
1 - Tune to the channel of which you want to block
the HbbTV pages.
2 - Press
OPTIONS, select
Preferences > HbbTV on this Channel and press
OK.
3 - Select Off and press OK.
Factory Settings
You can set the TV back to the original TV settings
(the factory settings).
To switch back to the original settings…
1 - Press
, select All Settings and press OK.
2 - Select General Settings and press
(right) to
enter the menu.
3 - Select Factory Settings and press OK.
4 - Select OK and press OK.
5 - Press
(left) repeatedly if necessary, to close
the menu.
Reinstall TV
You can redo a full TV installation. The TV is
completely reinstalled.
To redo a full TV installation…
1 - Press
, select All Settings and press OK.
2 - Select General Settings and select Reinstall
TV.
3 - Follow the instructions on screen. The installation
may take a few minutes.
12.6
Clock, Region and Language
Menu Language
To change the language of the TV menus and
messages…
1 - Press
, select All Settings and press OK.
2 - Select Region and Language and
press
(right) to enter the menu.
3 - Select Language > Menu Language and
press OK.
4 - Select on the language you need.
5 - Press
(left) repeatedly if necessary, to close
the menu.
Language preferences
Audio Language Settings
Digital TV channels can broadcast audio with several
spoken languages for a programme. You can set a
preferred primary and secondary audio language. If
audio in one of these languages is available, the TV
will switch to this audio.
If none of the preferred audio languages is available,
you can select another audio language which is
available.
To set the primary and secondary audio language…
1 - Press
, select All Settings and press OK.
2 - Selec Region and Language nd press
(right)
to enter the menu.
3 - Select Languages > Primary
Audio or Secondary Audio and press OK.
4 - Select on the language you need.
5 - Press
(left) repeatedly if necessary, to close
the menu.
61
To Next Page
Loading...
Need help?
General