Manual Recording
You can schedule a recording that is not linked to a
TV programme. You set the tuner type, channel and
the start and end time yourself.
To schedule a recording manually…
1 - Press
SOURCES, and select
Recordings.
2 - At the top of the screen, select
Scheduled .
3 - Use navigation keys to select
at the upper right
corner, and press OK.
4 - Select Schedule and press OK.
5 - Select the tuner from where you want to record
and press OK.
6 - Select the channel to record from and press OK.
7 - Select the day of the recording and press OK.
8 - Set the start and end time of the recording. Select
a button and use the
(up) or
(down) keys to
set the hours and minutes.
9 - Select Schedule and press OK to schedule the
manual recording.
The recording will appear in the list of scheduled
recordings and reminders.
Watch a Recording
To watch a recording…
1 - Press
SOURCES, and select
Recordings.
2 - In the list of recordings, select the recording you
need and press OK to start watching.
3 - You can use the
keys
(pause),
(play),
(rewind),
(fast
forward) or
(stop).
4 - To switch back to watch TV, press
EXIT.
15.2
Pause TV
What You Need
You can pause a digital TV broadcast and resume
watching it a bit later.
To pause a TV programme you need…
• a connected USB Hard Drive formatted on this TV
• digital TV channels installed on this TV
• to receive channel information for the on screen TV
Guide
With the USB Hard Drive connected and formatted,
the TV continuously stores the TV broadcast you are
watching. When you switch to another channel, the
broadcast of the former channel is cleared. Also
when you switch the TV to standby the broadcast is
cleared.
You cannot use Pause TV when you are recording.
For more information, in Help, select Keywords and
look up USB Hard Drive, installation or Installation,
USB Hard Drive.
Pause a Programme
To pause and resume a broadcast…
• To pause a broadcast, press
(Pause). A progress
bar at the bottom of the screen appears briefly.
• To call up the progress bar, press
(Pause) again.
• To resume watching, press
(Play).
With the progress bar on screen, press
(Rewind)
or press
(Forward) to select from where you want
to start viewing the paused broadcast. Press these
keys repeatedly to change speed.
You can pause a broadcast for a maximum time span
of 90 minutes.
To switch back to the live TV broadcast,
press
(Stop).
Replay
Since the TV stores the broadcast you are watching,
you can mostly replay the broadcast for a few
seconds.
To replay a current broadcast…
1 - Press
(Pause)
2 - Press
(Rewind). You can
press
repeatedly to select from where you want
to start viewing the paused broadcast. Press these
keys repeatedly to change speed. At one point you
will reach the start of the broadcast storage or the
maximum time span.
3 - Press
(Play) to watch the broadcast again.
4 - Press
(Stop) to watch the broadcast live.
72
To Next Page
Loading...
Need help?
General