3.2.3 Rear Cover
Warning: Disconnect the mains power cord before removing the rear cover.
7303/7503 series:
1. Remove all fixation screws [2] and [3] that secure the Back cover assy.
2. Unplug the connector [2] that marked by red box below from SSB.
3. Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.
(7303/7503 series)
Remark: Pictures above are taken from model 43PUS7303/12, but instructions will be similar for other 7303/7503 series models.
2
3
2
2
2 2 2
2
2
2
2
2
2
2
2
2
2
3
2
2