5.3 Panel Code
Press the following key sequence on a standard RC transmitter: “062598” directly followed by MENU and “xxx”, where “xxx” is a 3 digit decimal value
of the panel type: see column “Display Code” in below tab. After resetting the Display Code, restart the set immediately.
CTN_ALT BOM# Panel Type Display Code
Setting Set
Option Code
43PUS7303/12
TPT430U3-QVN03.U S0B0K 030 167
49PUS7503/12
TPT490F2-FN02.S S802A 034 171
50PUS7303/12
TPT500U1-QVN03.U S5B0Y 031 168
55PUS7303/12
TPT550U1-QVN05.U S57B0F 032 169
55PUS7503/12
TPT550U1-QVN05.U S57B0E 035 172
65PUS7303/12
TPT650UA-QVN06.U S300Q 033 170
65OLED873/12
LC650AQD-EKAA KR LGD 029 164
65OLED973/12
LC650AQD-GKA6 KR LGD 023 134