Philips 55PUS8809 User Manual

DVI to HDMI
If you still own a device that only has a DVI connection, you can
connect the device to any of the
HDMI
connection with a DVI
to HDMI adapter.
Connect the audio L/R cable to the
AUDIO IN
connector (mini-
jack 3.5mm).
Y Pb Pr
Y Pb Pr - Component Video is a high quality connection.
The YPbPr connection can be used for High Definition (HD) TV
signals. Next to the Y, Pb and Pr signals add the Audio Left and
Right signals for sound.
Match the YPbPr (green, blue, red) connector colours with the
cable plugs when you connect.
Use an Audio L/R cinch cable if your device also has sound.
Scart
SCART is a good quality connection.
The SCART connection can be used for CVBS and RGB video
signals but cannot be used for High Definition (HD) TV signals.
The SCART connection combines video and audio signals. The
SCART connection also supports NTSC playback.
Audio Out - Optical
Audio Out - Optical is a high quality sound connection.
This optical connection can carry 5.1 audio channels. If your
device, typically a Home Theatre System (HTS), has no HDMI
ARC connection, you can use this connection with the Audio In
- Optical connection on the HTS. The Audio Out - Optical
connection sends the sound from the TV to the HTS.
You can set the type of the audio out signal to fit the audio
capabilities of your Home Theatre System.
For more information, press

Keywords
and look up
Audio
Out Settings
.
If the sound does not match the video on screen, you can adjust
the audio to video synchronisation.
For more information, press

Keywords
and look up
Audio
to Video Sync
.
4.2
EasyLink HDMI CEC
EasyLink
With EasyLink you can operate a connected device with the TV
remote control. EasyLink uses HDMI CEC (Consumer
Electronics Control) to communicate with the connected
devices. Devices must support HDMI CEC and must be
connected with an HDMI connection.
12

Philips 55PUS8809 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	55 \
Display brightness	450 cd/m²
Native aspect ratio	16:9
LED backlighting type	-
Supported video modes	1080p
Display diagonal (metric)	139 cm
Screen format adjustments	Zoom
Motion interpolation technology	PMR (Perfect Motion Rate) 1000 Hz
RMS rated power	30 W
Number of speakers	2
Auto volume leveler	Yes
PC in (D-Sub)	No
HDMI ports quantity	4
DVI-D ports quantity	0
USB 2.0 ports quantity	3
Component video (YPbPr/YCbCr) in	1
Consumer Electronics Control (CEC)	EasyLink
Package depth	198 mm
Package width	1338 mm
Package height	934 mm
Package weight	31700 g
Product color	Silver
Panel mounting interface	400 x 400 mm
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (off)	0.3 W
Power consumption (typical)	135 W
3D type	Active
Ambient lighting type	3-sided
Annual energy consumption	187 kWh
Tuner type	Analog & digital
Analog signal format system	NTSC, PAL, SECAM
Digital signal format system	DVB-C, DVB-S, DVB-S2, DVB-T, DVB-T2
Video apps	YouTube
Lifestyle apps	Facebook, Skype, Twitter
Audio formats supported	AAC, MP3, WMA
Image formats supported	BMP, GIF, JPG, JPS, PNG, PNS
Video formats supported	3GP, AVC, AVI, H.264, MKV, MPEG1, MPEG2, MPEG4, VC-1, WMV9
Subtitle formats supported	MKV, SMI, SRT, SUB, TXT
Operating temperature (T-T)	5 - 35 °C
Cables included	AC

Weight and Dimensions

Depth (with stand)	230 mm
Width (with stand)	1280 mm
Height (with stand)	768 mm
Weight (with stand)	25400 g
Depth (without stand)	38 mm
Width (without stand)	1240 mm
Height (without stand)	713 mm
Weight (without stand)	24800 g