Caution
Caution to prevent damage to and malfunctioning of the product:
- Prevent the adapter and motor unit from coming into contact with
water.
- Keep the adapter and the silicone tubes away from heated
surfaces to avoid overheating and deformation of these parts.
- Never put the motor unit or the adapter in water, in a dishwasher
or in a sanitizer.
- Although the breast pump is compliant with applicable EMC
directives, it may still be susceptible to excessive emissions and/
or may interfere with other equipment.
A consequence can be that the breast pump switches o or goes
into error mode.
To prevent interference, keep other electric equipment away from
the breast pump
during expressing (see ‚Technical information‘).
- There are no user serviceable parts inside the motor unit of the
breast pump. No modication of equipment is allowed. If you do,
your warranty becomes invalid.
- Do not short-cut the supply terminals of the batteries.
Preparing for use
Cleaning and sanitizing
The motor unit, the silicone tube, cap and the adapter do not require cleaning and sanitizing, as they do
not come into contact with breast milk. Clean and sanitize all other parts of the breast pump before rst
use. Also clean these parts after each subsequent use and sanitize them before each subsequent use.
Caution: Never put the motor unit or the adapter in water, in a dishwasher or in a sanitizer, as this
causes permanent damage to these parts.
Cleanable parts
Clean the following parts before (rst) use and after each subsequent use. Please check the list in the
General Description section to see which items are included with your breast pump.
English
10
To Next Page
Loading...
Need help?
General
