40 EN
» With the registration, you can get
information about software update and
product support at this Web page or
via your mailbox that is registered as
the account for Club Philips.
Perform the upgrade
1 Check the current rmware version of this
system (see 'View system information' on
page 41).
2 Go to www.philips.com/support.
3 Login with your account for Club Philips.
» Support information about your
registered product is displayed.
4 Click the link of "Firmware Upgrade
Readme File" (the exact wording of this
link name may vary in different languages).
5 Read and understand the instructions on
rmware upgrade.
6 Follow the instructions to download the
upgrade packet and complete the upgrade.
• If the upgrade fails, reboot this system,
and then perform the upgrade again.
15 Product
information
Note
• Product information is subject to change without prior
notice.
General
Power supply 12 V DC (11 V - 16 V),
negative ground
Fuse 15 A
Suitable speaker
impedance
4 - 8
Maximum power
output
50 W x 4
Continuous power
output
22 W x 4 channels (4
10% T.H.D.)
Pre-Amp output
voltage
2.5 V (CD play mode; 1
kHz, 0 dB, 10 k
load)
Sub-woofer output
voltage
2.5 V (CD play mode, 61
Hz, 0 dB, 10 k
load)
Aux-in level 800 mV
Dimensions (W x
H x D)
178 x 101.5 x 160 mm
Weight (main unit)
3.1 kg
Disc player
System DVD / CD audio /
MP3 system
Disc diameter 12 cm
Frequency response 20 Hz - 20 kHz
Signal/noise ratio > 75 dB
Total harmonic distortion Less than 0.3%
Channel separation > 55 dB
Video signal format NTSC/PAL
Video output 1 +/- 0.2 V p-p
To Next Page
Loading...
Need help?
General
