Philips EasyKey 5000 Series User Manual

12
System date initialization
Remove the battery cover, then double
press the [RES] hole with a sharp
object, after hearing a voice prompt of
“Restoring to default settings”, all user
information will be emptied.
Choose the language as needed: For
Chinese, press [1]; for English, press
[2]. After hearing a voice prompt of
“Succeeded”, press [*] until you exit the
master mode.
Enter [4] to get into system settings,
then enter [1] to get into language
settings.
The default language is English.
4
Language Settings
or
2
1
1
Enter [#], enter master PIN code and
conrm with [#].
System Settings
Attention
The default volume is “high volume”.
Choose the volume as needed: For
high volume, press [1]; for low volume,
press [2]; for mute mode, press [3]. After
hearing a voice prompt of “Succeeded”,
press [*] until you exit the master mode.
Enter [4] to get into system settings, then
enter [2] to enter into volume settings.
24
Volume Settings
3
or or
2
1
Enter [#], then enter master PIN code
and conrm with [#].
Attention
or
2
1
Enter [4] to get into system settings,
then enter [3] to enter into identify
verication methods portfolio.
For single verication method, press
[1]; for dual verication method, press
[2]. After hearing a voice prompt of
“Succeeded”, press [*] until you exit the
master mode.
4
Switch to Dual Verication Mode
3
Enter [#], then enter master PIN code
and conrm with [#].

Philips EasyKey 5000 Series Specifications

General

Brand	Philips
Model	EasyKey 5000 Series
Category	Door locks
Language	English