Philips EasyKey 5000 Series User Manual

21
How to replace batteries
When the battery voltage is insucient, and
the door cannot be opened from the outside,
you can power up the lock through the Micro
USB interface by using a 5V power bank as
an emergency power supply. After opening
the door lock, please replace the batteries
immediately.
How to apply an emergency power supply
The lock is powered by four 1.5V alkaline
batteries. The battery cabinet is located
at the upper part of the inside escutcheon.
Push the battery cover upwards to remove
the batteries.

Philips EasyKey 5000 Series Specifications

General

Brand	Philips
Model	EasyKey 5000 Series
Category	Door locks
Language	English