EasyManuals Logo

Philips HD8827 User Manual

Philips HD8827
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
4 Apply a thin layer of grease to the rails on both sides (see figure).
5 Insert the brew group as described in section 'Weekly cleaning of the
brew group'.
You can use the grease tube multiple times.
Classic milk frother cleaning (daily)
Remove the external part of the classic milk frother and rinse it with fresh
water.
Classic milk frother and steam wand cleaning (weekly)
1 Remove the external part of the classic milk frother and rinse it with fresh
water.
2 Remove the upper part of the classic milk frother from the steam wand
and rinse it with fresh water.
3 Clean the steam wand with a wet cloth.
4 Put the upper part back into the steam/hot water wand (make sure it is
completely inserted).
5 Reassemble all the classic milk frother parts.
Descaling
Aroma plus
Hot water
Steam
Espresso
Memo Memo Memo
Calc
clean
Espresso lungo Coee
When the CALC CLEAN button lights up continuously, you need to descale
the machine. If you do not descale the machine when this button indicates
this, the machine stops working properly. In that case, repairs are not
covered by the guarantee.
Only use Saeco descaling solution to descale the machine. Saeco descaling
solution is designed to ensure optimal performance of the machine. The use
of other products may damage the machine and leave residues in the water.
You can buy Saeco descaling solution in the online shop at
www.shop.philips.com/service. The descaling procedure lasts 30minutes
and consists of a descaling cycle and a rinsing cycle. You can pause the
descaling or rinsing cycle by pressing the ESPRESSO button. To continue
the descaling or rinsing cycle, press the ESPRESSO button.
Descaling procedure
1 Remove and empty the drip tray and coffee grounds container. Place the
drip tray and coffee grounds container back into place.
2 Remove the classic milk frother from the hot/water steam wand.
3 Remove the water tank and the “INTENZA+” water filter from the water
tank (if present), replace it with the small white original one.
4 Pour the descaling solution in the water tank. Fill the water tank with
fresh water up to the CALC CLEAN level indication. Place the water tank
back in the machine.
21
English

Table of Contents

Other manuals for Philips HD8827

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Philips HD8827 and is the answer not in the manual?

Philips HD8827 Specifications

General IconGeneral
TypeEspresso machine
Coffee inputCoffee beans
Water tank capacity1.8 L
Bean container capacity250 g
Pump pressure15 bar
Milk frotherYes
Dimensions (WxDxH)215 x 429 x 330 mm
Weight7.2 kg
Power consumption1850 W
Appliance placementCountertop
Product typeEspresso machine
Coffee maker typeFully automatic
Built-in grinderYes
Adjustable grinder settingsYes
Number of grinder settings5
Milk tankNo
Number of spouts2
Adjustable coffee spout heightYes
Control typeButtons
Housing materialPlastic
Removable brewing unitYes
Removable water tankYes
Removable drip trayYes
Dishwasher-proof partsYes
Cord length1 m
AC input voltage230 V
AC input frequency50 Hz
Product colourBlack
Special FeaturesAroma seal

Related product manuals