Philips HTL2111A User Manual

13EN
7 Troubleshooting
Warning
• Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at www.
philips.com/support.
Sound
No sound from SoundBar speakers.
• Connect the audio cable from your
SoundBar to your TV or other devices.
• Reset your SoundBar to its factory settings.
• On the remote control, select the correct
audio input.
• Make sure that the SoundBar is not muted.
Distorted sound or echo.
• If you play audio from the TV through the
SoundBar, make sure that the TV is muted.
Bluetooth
A device cannot connect with the SoundBar.
• The device does not support the
compatibleprolesrequiredforthe
SoundBar.
• You have not enabled the Bluetooth
function of the device. See the user manual
of the device on how to enable the
function.
• The device is not correctly connected.
Connect the device correctly. (see 'Play
audio through Bluetooth' on page 10)
• The SoundBar is already connected with
another Bluetooth device. Disconnect the
connected device, then try again.
Quality of audio play from a connected
Bluetooth device is poor.
• The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
The connected Bluetooth device connects and
disconnects constantly.
• The Bluetooth reception is poor. Move the
device closer to the SoundBar, or remove
any obstacle between the device and the
SoundBar.
• Turn off Wi-Fi function on the Bluetooth
device to avoid interference.
• For some Bluetooth, the Bluetooth
connection can be deactivated
automatically to save power. This does not
indicate any malfunction of the SoundBar.

Philips HTL2111A Specifications

Sound Specifications

speaker output power	2 x 20 W
total power RMS	40 W
sound system	Dolby Digital

Loudspeakers

loudspeaker types	Integrated with main unit
speaker drivers per side	2 x 2" Fullrange woofers
speaker impedance	4 ohm

Connectivity

side connections	Audio In (3.5mm), USB
iPod/iPhone	via 3.5mm Audio In, via bluetooth
rear connections	AUX in, Digital coaxial in, Digital optical in

Power

power consumption	40 W
power supply	110-127V / 220-240V, ~50-60Hz
standby power consumption	< 0.5 W

Weight and Dimensions

main unit dimensions (W x H x D)	845 x 72 x 93 mm
main unit weight	1.93 kg
weight including packaging	2.88 kg