Philips HTL2111A User Manual

7EN
3 Connect
This section helps you connect your SoundBar
to a TV and other devices.
For information about the basic connections of
your SoundBar and accessories, see the quick
start guide.
Note
• Foridenticationandsupplyratings,refertothetype
plate at the back or bottom of the product.
• Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Placement
Place your Soundbar as shown below.
Connect audio from TV and
other devices
Play audio from TV or other devices through
your Soundbar.
Use the best quality connection available on
your TV and other devices.
Option 1: Connect audio through a
digital optical cable
Best quality audio
1 Using an optical cable, connect the
OPTICAL connector on your SoundBar to
the OPTICAL OUT connector on the TV
or other device.
• The digital optical connector might be
labeled SPDIF or SPDIF OUT.
Option 2: Connect audio through a
digital coaxial cable
Good quality audio
1 Using a coaxial cable, connect the
COAXIAL connector on your SoundBar
to the COAXIAL/DIGITAL OUT
connector on the TV or other device.
TV

Philips HTL2111A Specifications

Sound Specifications

speaker output power	2 x 20 W
total power RMS	40 W
sound system	Dolby Digital

Loudspeakers

loudspeaker types	Integrated with main unit
speaker drivers per side	2 x 2" Fullrange woofers
speaker impedance	4 ohm

Connectivity

side connections	Audio In (3.5mm), USB
iPod/iPhone	via 3.5mm Audio In, via bluetooth
rear connections	AUX in, Digital coaxial in, Digital optical in

Power

power consumption	40 W
power supply	110-127V / 220-240V, ~50-60Hz
standby power consumption	< 0.5 W

Weight and Dimensions

main unit dimensions (W x H x D)	845 x 72 x 93 mm
main unit weight	1.93 kg
weight including packaging	2.88 kg