Philips TAT3217 User Manual

5 Reset the
earpieces
On your Bluetooth device, go to the
Bluetooth menu and remove
Philips TAT3217 from the device list.
Turn o the Bluetooth function of
your Bluetooth device.
Return earpieces to charging case,
close the lid and re-open the lid.
Press button on box twice.
Follow steps in “Use your earpieces-
connect the earpieces to your
Bluetooth device.”
Pair the earpieces with your
Bluetooth device, select Philips
TAT3217.
If you encounter any pairing or
connection issue, you can follow the
following procedure to reset your
earpieces to factory default settings.
If there is no response from the
earpieces, you can follow the below
step to reset the hardware of your
earpieces.
Tap and hold multi-function touch
for 10 seconds.
6 Technical data
Music play time: 6 + 20 hours
Talk time: 6 hours
Charging time: 2 hours
Lithium-ion battery 40 mAh on
each earpiece, Lithium-ion battery
460 mAh on charging case
Bluetooth version: 5.2
Compatible Bluetooth proles:
• HFP (Hands-Free Prole)
• A2DP (Advanced Audio
Distribution Prole)
• AVRCP (Audio Video Remote
Control Prole)
Supported audio codecs: SBC
Frequency range: 2.402-2.480 GHz
Transmitter power: < 13 dBm
Operating range: Up to 10 meters
(33 feet)
USB-C port for charging
Low battery warning: available
 Specications are subject to change without
notice.
10 EN
Note
1
2
3
4
5
6

Philips TAT3217 Specifications

General

Control type	Touch
Headset type	Binaural
Product type	Headset
Product color	White
Wearing style	In-ear
Music playback	Yes
Operating keys	Answer/end call, Play/pause
Control unit type	On-ear control unit
Recommended usage	-
Protection features	Rain proof, Splash proof, Sweat resistant
International Protection (IP) code	IPX5
Wireless range	10 m
Bluetooth version	5.2
Bluetooth profiles	A2DP, AVRCP, HFP
Connectivity technology	Wireless
Impedance	16 Ω
Driver type	Dynamic
Driver unit	10 mm
Ear coupling	Intraaural
Headphone frequency	20 - 20000 Hz
Maximum input power	5 mW
Headphone sensitivity	101.5 dB
Intraaural headphones type	Earbuds
Microphone type	Built-in
Number of microphones	2
Base station USB connector	USB Type-C
Battery type	Built-in battery
Charging source	USB
Battery capacity	40 mAh
Fast charging time	15 min
Battery recharge time	2 h
Continuous audio playback time	6 h
Battery capacity (charging case)	460 mAh
Continuous audio playback time (with charging case)	26 h
Package type	Box
Package depth	33 mm
Package width	95 mm
Package height	175 mm
Package weight	131 g
Cables included	USB Type-A to USB Type-C
Eartips material	Silicone
Charging case type	Wired
Accessories included in set	3 sizes silicone eartips
Harmonized System (HS) code	85183000

Weight and Dimensions

Depth	20 mm
Width	34.1 mm
Height	21.8 mm
Weight	51 g
Charging case dimensions (W x D x H)	62.5 x 24 x 45.6 mm