How to wear
Select suitable ear tips for optimum t
A tight, secure t will provide the best
sound quality and noise isolation.
Pair the earpieces with
your Bluetooth device for
the rst time
Test which ear tip provides you with
the best sound and wearing
comfort.
3 sizes of silicone ear tip covers are
provided: large, medium and small.
L M S
1
2
Check left or right orientation of the
earpieces.
Insert the earpieces into the ears
and twist slightly until a secure t is
achieved.
Insert the earpieces
Turn on the Bluetooth function of
your Bluetooth device.
Pair the earpieces with your
Bluetooth device. Refer to the user
manual of your Bluetooth device.
After powering on, if the earpieces cannot nd
any previously connected Bluetooth device, it
will automatically switch to pairing mode.
The LEDs on both earpieces
ash white and blue alternately
The earpieces are now in pairing
mode and are ready to pair with
a Bluetooth device
(e.g. a mobile phone)
03"
1
2
1
2
Make sure that the earpieces are
fully charged and powered o.
Open the cover of the charging
case. Press and hold the pairing
button for approximately 3 seconds.
3
4
6 EN