Philips TAT3217 User Manual

3 Get started
Charge the battery
 Before you use your headphones, place them
in the charging case and charge the battery
for 2 hours for optimum battery capacity and
lifetime.
 Use only the original USB-C charging cable to
avoid any damage.
 Finish your call before charging. Connecting
the earpieces to charge will power them o.
EN 5
Note
Charging case
Plug one end of the USB-C cable into
the charging case and the other end
into the power source.
 The charging case serves as a portable backup
battery for charging the earpieces. When the
charging case is fully charged, it will fully
recharge the earpieces 3 times.
Tip
Earpiece
• The earpieces start charging and the
blue LED light goes on
• When the earpieces are fully
charged, the blue light will go o
Take out the earpieces and remove the
insulation labels.
Put the earpieces back into the
charging case and close the lid.
 Normally, a full charge takes 2 hours (for the
earpieces or charging case) by USB cable.
Tip

Philips TAT3217 Specifications

General

Control type	Touch
Headset type	Binaural
Product type	Headset
Product color	White
Wearing style	In-ear
Music playback	Yes
Operating keys	Answer/end call, Play/pause
Control unit type	On-ear control unit
Recommended usage	-
Protection features	Rain proof, Splash proof, Sweat resistant
International Protection (IP) code	IPX5
Wireless range	10 m
Bluetooth version	5.2
Bluetooth profiles	A2DP, AVRCP, HFP
Connectivity technology	Wireless
Impedance	16 Ω
Driver type	Dynamic
Driver unit	10 mm
Ear coupling	Intraaural
Headphone frequency	20 - 20000 Hz
Maximum input power	5 mW
Headphone sensitivity	101.5 dB
Intraaural headphones type	Earbuds
Microphone type	Built-in
Number of microphones	2
Base station USB connector	USB Type-C
Battery type	Built-in battery
Charging source	USB
Battery capacity	40 mAh
Fast charging time	15 min
Battery recharge time	2 h
Continuous audio playback time	6 h
Battery capacity (charging case)	460 mAh
Continuous audio playback time (with charging case)	26 h
Package type	Box
Package depth	33 mm
Package width	95 mm
Package height	175 mm
Package weight	131 g
Cables included	USB Type-A to USB Type-C
Eartips material	Silicone
Charging case type	Wired
Accessories included in set	3 sizes silicone eartips
Harmonized System (HS) code	85183000

Weight and Dimensions

Depth	20 mm
Width	34.1 mm
Height	21.8 mm
Weight	51 g
Charging case dimensions (W x D x H)	62.5 x 24 x 45.6 mm