01_18
01_19
Setting the hour/minutes function (01_18, 01_19)
To set or adjust the time, with vehicle running or with key inserted in «KEY ON» po-
sition, proceed as follows:
- with a long press of the "SET" button, the number of hours flashes in "hh" format;
- adjust the hours value by briefly pressing the same «SET» button;
- with a long press, the set value is confirmed (or present value if not modified) and it
causes the flashing of the minutes value in the format «mm».
- adjust the minutes value by briefly pressing the same «SET» button;
- with a long press, the set value is confirmed (or present value if not modified) and it
exits from the clock adjustment.
If, during the adjustment procedure, the «SET» button is not pressed for a time longer
than ten seconds, the procedure is interrupted and clock value remains the same as
before the adjustment; repeat the adjustment operations.
WARNING
FOR SAFETY REASONS THE TIME SETTING IS ONLY POSSIBLE WITH THE VE-
HICLE AT A STANDSTILL.
WARNING
DISCONNECTING THE BATTERY CABLES WILL RESET THE CLOCK
22
To Next Page
Loading...
Need help?
General
