03_16
A certain lowering of the level is caused by wear on the brake pads. Should the level
appear to be below the minimum mark, please contact an Authorised Service Centre
or Dealer in order to have a thorough inspection of the braking system carried out.
03_17
Braking system fluid top up (03_17)
- To top-up the brake fluid, unscrew the two screws "A" and remove the cap "B" from
the brake pump to restore the optimal level.
WARNING
BRAKING CIRCUIT FLUID IS HIGHLY CORROSIVE; MAKE SURE THAT IT DOES
NOT COME INTO CONTACT WITH THE PAINTWORK.
CAUTION
ONLY USE DOT 4-CLASSIFIED BRAKE FLUID.
WARNING
THE BRAKE FLUID IS HAZARDOUS: IN CASE OF ACCIDENTAL CONTACT,
WASH OFF WITH WATER.
WARNING
THE BRAKING CIRCUIT LIQUID IS HYGROSCOPIC, AND ABSORBS THE HU-
MIDITY OF SURROUNDING AIR. IF THE HUMIDITY IN THE BRAKING FLUID
EXCEEDS A CERTAIN VALUE, IT WILL LEAD TO INEFFICIENT BRAKING. NEV-
ER USE BRAKING FLUID KEPT IN CONTAINERS THAT HAVE ALREADY BEEN
OPENED, OR PARTIALLY USED.
74
To Next Page
Loading...
Need help?
General
