API Functions34
Copyright © 2006–2016 Pico Technology Ltd. All rights reserved.ps2000pg.en r11
5.18
ps2000_run_streaming
int16_t ps2000_run_streaming
(
int16_t handle,
int16_t sample_interval_ms,
int32_t max_samples,
int16_t windowed
)
This function tells the oscilloscope to start collecting data in compatible streaming
mode. If this function is called when a trigger has been enabled, the trigger settings
will be ignored.
For streaming with the PicoScope 2202, 2203, 2204, 2204A, 2205 and 2205A variants,
we recommend you use ps2000_run_streaming_ns instead: this will allow much
faster data transfer.
Only recommended for use with PicoScope 2104 and 2105
handle: the handle of the required oscilloscope
sample_interval_ms: the time interval, in milliseconds, between
data points. This can be no shorter than 1 ms.
max_samples: the maximum number of samples that the driver is
to store. This can be no greater than 60 000. It is the application's
responsibility to retrieve data before the oldest values are
overwritten.
windowed: if this is 0, only the values taken since the last call to
ps2000_get_values are returned. If this is 1, the number of
values requested by ps2000_get_values are returned, even if
they have already been read by ps2000_get_values.
non-zero: if streaming has been enabled correctly
0: if a problem occurred or a value was out of range
To Next Page
Loading...
Need help?
General
