Pima FORCE User Manual

FORCE Alarm System User Guide
16 PIMA Electronic Systems
Chap. 7 Users and Codes
Set the codes and definitions of the users of the alarm system, and system codes. All the codes,
except the Short Code are 4-6 digit long. The menu includes the sub-menus that follows.
1.  Users: see the next sub-section.
2. Master Code: the Master user code
3. Quick arm code: 2-digit code, used for arming only. This code can be used by anyone who
does not have a user code.
4. Duress code: see the Glossary , on page 29.
5. Home Auto.: a code for home automation systems
5
6. Operation codes: see next page.
7.1.1 Users
User Menu  Users and Codes  Users
To scroll between users, press # or *.
Parameter
Description
Code
A unique 4-6 digit user code
Name
User text, up to 16 characters.
Keyfob
Enroll wireless key fob or panic button (one per user) to the user. The key fob
is used for arming and disarming, and activate devices. A wireless module is
required; refer to the technician).
1. Press * or # to select a user.
2.  Enrolled: indicates whether a key fob or a panic button is enrolled to
the user.
3. Enroll
a. Manual enrollment. Use it for PIMA peripherals only.
 Serial no.: enter the device’s serial number.
 Enroll: press to enroll the device.
b. Auto enrollment:
 Status
o Waiting: the system is waiting for a signal. Press one of the
key fob’s buttons, or the panic button for 5 seconds.
o Received: a signal was received. The keypad will sound
beeps. If more than one device is received, press and
select one.
 Serial no.: the selected device’s number
 Signal: the selected device’s signal strength - Strong , Good , or
Poor . If the signal is poor, change the location of the device.
 Enroll: press to enroll the selected device.
5
Only systems that are approved by PIMA Electronic Systems.

Pima FORCE Specifications

General

Brand	Pima
Model	FORCE
Category	Security System
Language	English