Pioneer CT-W403R User Manual

FRONT PANEL FACILITIES
e
When
the
FLEX
system
is
enaaged,
each
music
selection
is
aii
automatically
adjusted
during
playback.
System
operution
status
is
indicated
by
whether
the
1/f
indicators
is
fit.
NOTE:
@
When
a
tape
has
been
recorded
at
a
high
frequency
/evel
above
the
compensation
level,
the
FLEX
system
operation
is
automat-
cally
defeated
during
playback.
» FUNCTION DISPLAY
(n>)
agile BC se, cD Sync
it Ii. LOM UUEED EQDE DEERE DEREE QUGED ERED EEUIE
i
It
LLG
H
| SPQM OUTED CHER CEEUE QNU00 TEEEE ERTEE VGEEE
i 4 PEanY: > 4¢f COPY —-CO-20-10 -G ~3 *O +3 5
i i [ [ | Ne
!
i
8
Q
@
@
:
4
|
CT-W503R only
Except for CT-W203
@ DECK | counter indicator
Normally the tape counter or time counter is displayed (see
page 10}. It flashes for 4 seconds after the power cord is con-
nected to the power supply.
@ DOLBY NR B/C indicator
® AUTO indicator (CT-W503R only)
This indicator lights steadily when the AUTO-NR button is
pressed.
® Level meter
Holds peak for about 1.3 seconds.
The “@” mark beside the 0 dB mark indicates the Dolby NR sys-
tems standard level.
® CD - DECK SYNCHRO indicator (CD SYNC) (CT-W503R
only}
This indicator lights steadily when the CD SYNC button is
pressed-and the operation starts,
@® DECK I tape transport mode indicators
@ See page 10.
@ FLEX (1/f) indicator (CT-W503R only)
This indicator Sights when the FLEX button is pressed.
Synchro copy indicator (COPY)
indicator lights steadily: Copying at normal speed.
indicator flashes: Copying at twice normal speed.
® DECK Hl counter indicator ‘
Normally the tape counter or time counter is displayed (see
page 10). It flashes for 4 seconds after the power cord is con-
nected to the power supply.
@ DECK I! TIME counter mode indicators
e@ See page 10.
DOLBY NR & DOLBY HX PRO
@ Dolby NR Systems
Dolby NR systems are designed to reduce the amount of tape hiss,
mainly in the treble components. During recording, the high-
pitched pianissimo sounds which are most characteristic of
audible noise are boosted, and during playback, only these
boosted sections are attenuated, so that tape sound is returned to
normal. As a result, the noise is attenuated by an amount equal to
the boosting in the treble range. The Dolby B-type NR system re-
duces noise in the trebie range, cutting tape hiss and expanding
the dynamic range. The Dolby C-type NR system is even more ef-
fective in reducing noise, as it reduces noise from the mid-range
on.
NOTE:
| When a tape has been recorded using the Dolby 8-type or C-type
NR system, make sure that the DOLBY NR switch is set to the same
Position during playback.
E Dolby HX PRO Headroom Extension System
The DOLBY HX PRO system contrals the bias current during re-
cording and maintains it at the optimat ievel based on the arnount
of the high-frequency components in the music signal. It therefore
provides excellent recording quality even when recording signals
from digital sources, which contain a large amount of high-fre-
quency components. To guarantee optimal results, the HX PRO
system is activated automatically when recording begins. Since
this system controls the quality of recording itself, the clarity of
the sound will be maintained even when the tapes are played back
on another cassette deck which does not contain the HX PRO
Headroom Extension System.
|
i
— 9
<RRBI142>
En

Pioneer CT-W403R Specifications

General

Brand	Pioneer
Model	CT-W403R
Category	Cassette Player
Language	English