For details concerning operation, refer to the XM
tuner’s operation manuals. This section pro-
vides information on XM operations with this
unit which differs from that described in the XM
tuner’s operation manual.
Basic operations
2 31 4
5
1 XM band indicator
2 XM channel number indicator
3 XM preset number indicator
4 XM channel select setting indicator
Shows what channel select setting has been
selected. CH is displayed when
Channel number is selected, and CAT is dis-
played when Category is selected.
5 XM text information
Shows the text information of broadcast
channel.
Select an XM band.
1 Press BAND/
.
! Band can be selected from XM-1, XM-2 or
XM-3.
Select a channel.
1 Turn LEVER.
! By turning and holding down LEVER, you
can increase or decrease the channel
number continuously.
! You can also perform tuning from a de-
sired channel category. (Refer to Selecting
a channel from a channel category on this
page.)
Switching the XM display
1 Press
/DISP.
Storing and recalling broadcast
stations
You can easily store up to six stations for each
band as presets.
! Six stations for each band can be stored in
memory.
1 Press
(list).
Preset screen is displayed.
2 Use M.C. to store the selected station in
memory.
Turn to change the preset number. Press and
hold to store.
3 Use M.C. to select the desired station.
Turn to change the station; press to select.
# You can also change the station by pushing
or or turning LEVER.
Function and operation
1 Press M.C. to display the main menu.
2 Use M.C. to select FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to select.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Channel mode (channel select mode setting)
You have two methods for selecting a channel: by
number and by category. When selecting by num-
ber, channels in any category can be selected. Se-
lect by category to narrow your search down to
only channels in a particular category.
1 Press M.C. to change the channel select
mode.
Channel number (channel number select set-
ting)—Category (channel category select set-
ting)
Selecting a channel from a
channel category
1 Switch the channel select settings to
Category.
Refer to Channel mode (channel select mode
setting) on this page.
2 Push
or to select the desired
channel category.
3 Turn LEVER to select the desired channel
from the selected channel category.
Displaying the Radio ID
1 Select the channel select settings to
Channel number.
Refer to Channel mode (channel select mode
setting) on this page.
2 Turn LEVER to select RADIO ID.
# If you select another channel, display of the ID
code is canceled.
# RADIO ID and the ID codes are repeatedly dis-
played one after the other.
SIRIUS Satellite Radio tuner
You can use this unit to control a SIRIUS Satellite
Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on these
points. For all other information on using the
SIRIUS tuner, please refer to the SIRIUS opera-
tion manual.
Listening to SIRIUS Satellite Radio
2 31 4
5
1 SIRIUS band indicator
2 SIRIUS channel number indicator
3 SIRIUS preset number indicator
4 SIRIUS channel select setting indicator
Shows what channel select setting has been
selected. CH is displayed when
Channel number is selected, and CAT is dis-
played when Category is selected.
I.R is displayed during the Instant Replay
mode.
5 SIRIUS channel name
Shows the channel name of broadcast chan-
nel.
Select a SIRIUS band.
1 Press BAND/
.
! Band can be selected from SR-1, SR-2 or
SR-3.
Select a channel.
1 Turn LEVER.
! By turning and holding down LEVER, you
can increase or decrease the channel
number continuously.
! You can also perform tuning from a de-
sired channel category. (Refer to Selecting
a channel from a channel category on the
next page.)
English
Available accessories
23
Section
Available accessories
En
03
To Next Page
Loading...
Need help?
General
