Pioneer PDR-509 Service Manual

72
PDR-509
MONITOR
DIGITAL
REC LEVEL
ANALOG
REC LEVEL
INPUT
SELECTOR
TIME
REPEAT
3
8
a
p
;os
24
5
7
9q
6
1
u
idfgytr
ew
1 POWER switch
Switches power to the unit on and off.
2 INPUT SELECTOR
Switches between the analog, optical digital and coaxial
digital inputs.
3 MONITOR
Press to monitor the selected input and display digital
source information.
4 TIME
Switches the display mode (elapsed track time, remain-
ing track time, total disc playing time, etc.)
5 DISP OFF
Press to switch the character display off. The indicator
above the button lights to remind you that the display is
switched off.
6 Function indicator
Indicates the current function of the unit:
Lit – recording a
CD-R/CD-RW, or erasing a CD–RW disc.
Blinking – record-mute and PMA - record modes.
7 OPEN/CLOSE 0
Press to open or close the disc tray.
8 RECORD ¶
Press to enter record-pause mode.
9 REC MUTE •
Records a blank section on a disc (for space between
tracks, etc.)
p DIGITAL REC LEVEL / 4 ¢
Turn the jog dail to set the digital recording level and
skip tracks.
Push the jog dial to: start playback (stop mode only) ;
input track number (during programming) ; display the
digital recording level (monitor, record, record-pause
modes).
q ANALOG REC LEVEL
Sets the recording level for analog-input recording.
Outside ring controls left input level; inside dial controls
right input level.
w TRACK NUMBER AUTO/MANUAL
Switches between automatic and manual track number-
ing when recording a disc. Indicator lights to remind you
when manual track numbering has been turned on.
e TRACK NUMBER WRITE [MANUAL]
Press during recording to start a new track number
(when in manual track numbering mode).
r FINALIZE
Press to start the disc finalization process (to make
recordable
CD s playable on ordinary CD players).
t ERASE (CD-RW discs only)
Press to start erasing tracks, or to re-initialize a disc.
y Remote sensor
u Character display
i 1 and ¡
Press and hold for fast-reverse and fast-forward
playback.
o 3
Press to play, or resume playing, a disc. Also use to
start recording from record-pause mode.
; REPEAT
Use to set the repeat mode (current track, disc, or
repeat off).
a 8
Press to pause playback or recording.
s 7
Press to stop playback or recording.
d DIGITAL SYNCHRO
Press to start recording on detection of a digital input
signal.
f PHONES jack
Plug in a pair of stereo headphones for private listening
or monitoring.
g LEVEL
Use to adjust the phones volume level.
The illustration shows the U.S. model.
8. PANEL FACILITIES AND SPECIFICATIONS
8.1 PANEL FACILITIES
Front Panel

Pioneer PDR-509 Specifications

General

Brand	Pioneer
Model	PDR-509
Category	Recording Equipment
Language	English