Pioneer VSX-828-K, VSX-828-S, VSX-528-K, VSX-528-S User Manual

Connecting your equipment
2
2
20
65
7
4
Connecting antennas
Connect the AM loop antenna and the FM wire antenna as
shown below. To improve reception and sound quality,
connect external antennas (see Using external antennas
below).
1 Push open the tabs, then insert one wire fully into each
terminal, then release the tabs to secure the AM antenna
wires.
2 Fix the AM loop antenna to the attached stand.
To fix the stand to the antenna, bend in the direction indicated
by the arrow (fig. a) then clip the loop onto the stand (fig. b).
3 Place the AM antenna on a flat surface and in a direction
giving the best reception.
4 Connect the FM wire antenna into the FM antenna
socket.
For best results, extend the FM antenna fully and fix to a wall
or door frame. Don’t drape loosely or leave coiled up.
Using external antennas
To improve FM reception
For Europe, Russia and U.K.
Use a PAL connector (not supplied) to connect an external FM
antenna.
For Australia
Connect an external FM antenna as shown below.
To improve AM reception
Connect a 5 m to 6 m length of vinyl-coated wire to the AM
antenna terminal without disconnecting the supplied AM
loop antenna.
For the best possible reception, suspend horizontally
outdoors.
2
1
3
4
fig. a
fig. b
FM UNBAL
75
75  coaxial cable
One-touch PAL
connector
FM UNBAL
75
J-shaped plug
(not supplied)
75  coaxial
cable
Outdoor
antenna
5 m to 6 m
Indoor antenna
(vinyl-coated
wire)
VSX-828_SYXE8_En.book 20 ページ ２０１３年３月１日 金曜日 午前９時１６分

Pioneer VSX-828-K, VSX-828-S, VSX-528-K, VSX-528-S Specifications

General

Brand	Pioneer
Model	VSX-828-K, VSX-828-S, VSX-528-K, VSX-528-S
Category	Receiver
Language	English