30
> Before Start > Part Names > Install > Initial Setup >Playback
Advanced Setup | Firmware Update | Others
Playing audio from an external device
Connections
You can play the audio from external devices such as TVs
and game consoles through this unit. If the external device
has an optical digital output terminal, connect using a digital
optical cable to the DIGITAL IN OPTICAL terminal on this
unit. When the external device is to be connected with an
analog audio cable, connect to the LINE IN jack on this unit.
Playing Back
1. Turn the unit on.
2. When playing a device connected to the DIGITAL IN
OPTICAL terminal, press LINE/DIGITAL repeatedly to
change the input on this unit to "Digital In".
When playing a device connected to the LINE IN
terminal, press LINE/DIGITAL repeatedly to change the
input on this unit to "Line".
3. Start play on the player.
0 When connected by a digital optical cable, this unit
supports linear PCM signals of up to 192 kHz/24 bits for
input.
a Digital optical cable, b Analogue audio cable
To Next Page
Loading...
Need help?
General
Weight and Dimensions
