4.32
ELECTRONIC FUEL INJECTION
P
RELIMINARY
V
ERS
I
ON
DIGITAL WRENCH™ OPERATION
Digital Wrench™ Diagnostic Software Overview
IMPORTANT: Refer to Section 2, 3 and 4 in the Instruction Manual provided in the Digital Wrench™ Diagnostic
Kit to install the Polaris Digital Wrench™ diagnostic software on your computer.
The Digital Wrench™ diagnostic software allows the technician to perform the following tests and observations:
• View or clear trouble codes
• Analyze real-time engine data
• Reflash ECU calibration files
• Perform guided diagnostic procedures
• Create customer service account records
• Perform output state control tests (on some models)
Special Tools (also refer to page 4.2)
Diagnostic Software Version
Always use the most current version of the Digital Wrench™
software to ensure you have the latest updates or enhancements.
New reprogramming files and guided diagnostic procedures are
added to these updates as they become available. For
information on how to determine if you have the latest update
available, refer to “Digital Wrench™ Version and Update ID”.
ECU Replacement
Although the need for ECU replacement is unlikely, a specific
replacement procedure is required to ensure that all essential
data contained within the original ECU is transferred to the
replacement ECU.
Refer to procedure and carefully follow all instructions provided
in Digital Wrench™.
Guided Diagnostic Available
Guided diagnostics are available within Digital Wrench™ for
all supported Trouble Codes (that is, any fault that will turn on
the ‘Check Engine’ indicator).
In addition, guided diagnostics are also available for many other
electrical sub systems.
Diagnostic procedures are added to subsequent versions of
Digital Wrench™ as they become available. Check your release
version often and upgrade when available to be sure you are
using the most current software available.
Digital Wrench™ Communication Errors
If you experience problems connecting to a vehicle or any
Digital Wrench™ related problem, visit the Digital Wrench™
Knowledge Base for the most current troubleshooting
information, FAQs, downloads and software updates at:
http://polaris.diagsys.com/.
DIGITAL WRENCH™ DIAGNOSTIC SOFTWARE PART NUMBER
Digital Wrench™ Diagnostic Kit PU-47063-A
PU-47063-A (listed above) INCLUDES:
Digital Wrench™ Software: PU-48731
Standard Interface Cable: PU-47151
SmartLink Module Kit: PU-47471
Fuel Pressure Gauge Kit PU-43506-A
Fuel Pressure Gauge Adapter PV-48656
Fluke 73 Digital Multi-Meter or Fluke 77 DMM PV-48656 (Fluke 77: PV-43568)
Laptop or Desktop Computer
USB/Serial Adaptor: Saelig RS-232
Commercially Available (refer to diagnostic software user
manual or HELP section for minimum requirements)
To Next Page
Loading...
Need help?
General
