4.38
ELECTRONIC FUEL INJECTION
P
RELIMINARY
V
ERS
I
ON
9. Copy (CTRL+C) the Request Code that will be required on
the dealer website in the next step. DO NOT CLOSE
Digital Wrench™ or the Request Code will be invalid.
NOTE: All characters are letters; there are no numbers
in a request code.
NOTE: Request Codes and Authorization Keys must
be entered EXACTLY as they appear on the screen.
10. Go to www.polarisdealers.com and click on “ReFlash
Authorization” from the “Service and Warranty” drop-
down menu.
11. Enter or paste (CTRL+V) the Request Code into the box.
12. Select the same file type from the list that you selected
previously while in Digital Wrench™. Enter the VIN along
with the customer’s name and address. When completed,
click the Authorize button once
to proceed.
13. An “Authorization Key” will appear in the upper left corner
of the screen. Copy (CTRL+C) this key exactly as it
appears.
14. Enter or paste (CTRL+C) the Authorization Key in the box
located on the Digital Wrench™ screen. Click the
‘Continue’ button and follow instructions provided on the
screen to complete the reprogramming procedure.
Copy Request Code to
obtain Authorization Key
Authorization Key goes here after
obtained from the dealer website
“Reflash Authorization”
“Service and Warranty”
Enter the
“Request Code”
Enter ALL the information and
click on the “Authorize” button
“Authorization Key”
Enter the
“Authorization Key”
To Next Page
Loading...
Need help?
General
