4
USING THE ROTARY KNOB AND MENU KEY
You can use the rotary knob and Menu key to adjust levels and access menus.
ADJUSTING LEVELS
Use the rotary knob and Menu key to adjust levels on the overhead unit. For example, to adjust the
volume level:
ACCESSING MENUS
Use the Menu key and rotary knob to access menus to change settings. For example, to access
the Settings menu while in Tuner or AUX mode.:
MULTI-LEVEL MENUS
All of the menus on the overhead unit have more than one level. To access items in multi-level
menus:
• Turn the rotary knob to highlight a menu item, then
• Press the rotary knob to select the highlighted item.
• Repeat these steps as many times as necessary to reach the menu item you require.
In this manual, accessing a multi-level menu item is shown by listing the menu items in order,
as in the following example:
Turn rotary knob
to open the Volume
screen
Press Menu
key
The menu is
displayed
Turn rotary knob to
scroll the highlight.
Press rotary knob to
to select Settings
menu.
The Settings
menu is
displayed
Press Menu to
exit. See “Menu
Key Operation”
on page 5.
Turn rotary knob to
adjust the level.
Press Menu to exit
(or leave to time
out). See “Menu
Key Operation” on
page 5.
13
20
PRESETS >
SETTINGS >
TREBLE >
BASS >
BALANCE >
LCD CONTRAST >
LCD BRIGHTNESS >
SETTINGS > TONE
The above example means: “turn and then press the rotary knob to select the Settings
menu” then “turn and then press the rotary knob to select the Tone menu”.
DRY BOX INSTRUCTIONS
STEP 1
Ensure that all cables are secured in
the cable management area.
Push the dry box up to close it.
STEP 2
Keep the latch in the OPEN
position as you close the dry box.
STEP 3
Push the dry box all the way up until it
will go no further.
Leave the latch in the OPEN position so
it clears the locking hook.
t
To Next Page
Loading...
Need help?
General