32
THE PERFECT FIT
Front Suspension Adjustments
Shock Damping (Indy Select Shock)
Adjustments to the compression stiff-
ness of Indy Select shocks can be
made by turning the adjustment screw
located near the base of the shock (+).
This adjustment is the easiest to per-
form and it should be considered first.
The factory setting for this shock is the
softest position, with the adjusting
screw all the way out (counterclock-
wise). If bottoming occurs, the Indy
Select feature should be used to achieve the desired ride. The shocks
have a wide range of adjustment capability. By turning the screw clock-
wise, the compression of the shock increases, stiffening the ride. When
adjusting these shocks, we recommend that you turn the screw only 1/4
turn at a time, then test ride. Always adjust both shocks equally.
+
To Next Page
Loading...
Need help?
General
